Ozone Access V7 Complete 10m2

Ozone Access V7 Kite Only 10m2:
The access is entry level de-power foil kite that is designed to make the learning process of snowkiting as safe and easy as possible.

• Entry level de-power foil
• Stable, predictable, unsurpassed ease of use
• Revolutionary Internal Re-Ride Release System
• The kite of choice for new comers and Snowkite schools

The seventh version has been further refined and re-modeled for improvements in both ease of use and flying characteristics. The design goal of the V7 was to improve all aspects of the kite to allow new comers to easily enjoy the sport from their very first session. This is made possible by creating an incredibly stable kite, which has constant pull, a large wind range and predictable handling.

The V7 has flatter arc than it’s predecessors giving it a wider wind range, this means more power and more depower. The rib spacing has been optimized to clean up the surfaces toward the tip, which sees gains in both performance and handling. New tab positions offer a rock solid feel in the air and maintain quick turning speed with a more responsive bar feeling. The low aspect ratio ensures stability in the gustiest of conditions, delivering constant power and progressive pull. Blow-out-valves on the under surface help avoid damage if the kite is crashed.

Even though the Access is developed for teaching and entry level riders it has become a favorite for experienced riders who require ultra stability in turbulent high mountain conditions. The Access is also a favorite for expeditions where it is essential to have safe and easy to use kites in extreme conditions.

REVOLUTIONARY INTERNAL RE-RIDE RELEASE SYSTEM

The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. The goal was to have a release system that once activated the kite can easily be re-launched without having to untangle or clear any lines. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you're ready again.

Another big advantage of our Internal Re-Ride Release System is the land and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or over the bar horn. This makes landing and packing your kite safe and easy even in high winds.

We thoroughly enjoyed developing and testing the Internal Re-Ride Release System. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user.

Note:
The Internal Re-Ride Release System cannot be upgraded to older kites as it includes lines that are running inside your kite.
For reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

Kite Only version includes

• Ozone Access Kite
• Access Bag
• Manual

Ozone Bar Contact Snow V4 50cm with 25m Lines:
Eine saubere und simple Konstruktion mit einem einfach zu bedienenden Trimm-System. Integriert ist unsere neueste Innovation – Der CLICK-IN LOOP.

Innovativer CLICK-IN LOOP
Ein völlig neu entwickelter schiebe-Auslösemechanismus ist mit einer unglaublich intuitiven, einschrittigen Reset Funktion ausgestattet. Der Auslösegriff liegt angenehm in der Hand, das System ist schnell und einfach zu aktivieren indem man den Griff von sich weg schiebt. Ein selbstpositionierender Auslösemechanismus setzt sich selbstständig in Position, um durch einfachstes wieder „Einclicken“ des Loops zurückgesetzt zu werden. Der Click-in Loop ist AFNOR NF S52-503 zertifiziert.

"Der Click-In Loop ist ein Schritt in die richtige Richtung wenn es darum geht deine Kiteerlebnisse einfacher zu gestalten - ganz egal wo deine Abdenteuer dich hin führen werden..."
Konstruktionsinspiration

Was ist das erste was du tust, wenn du dich in ein Auto setzt? Du klickst den Anschnallgurt ein. Das "Klick" Geräusch gibt dir das Gefühl, sicher angeschnallt zu sein und du weißt instinktiv wie du es zum Abschnallen wieder auslöst.

Die Konstruktion unseres Auslösesystems, dem Click-In Loop, ist genau durch dieses Prinzip inspiriert.
So wie das Anschnallen des Sicherheitsgurts zu einer natürlichen Aktion vor dem Anlassen des Autos geworden ist, so sollten auch Kiter ihr Auslösesystem vor und nach jeder Session aktivieren und wieder zurücksetzen.

Zudem wird dieser wichtige Sicherheitscheck häufig übersehen - die Überprüfung deines Auslösesystems vor jeder Session stellt sicher, dass es sicher funktioniert. Wir entwickelten die Click-In Funktion, um eine simple und intuitive Funktion zu erhalten. So wird das Aktivieren und Zurücksetzen zu einer Handlung, die in Fleisch und Blut übergeht.

WICHTIGER HINWEIS:
Alle Fahrer sollten ihre Kiteleash mit dem Auswehsystem verbinden. Das ist die kleine Öse am Edelstahlring. Wenn das Auslösesystem aktiviert wird, weht der Kite aus und fällt zu Boden / Wasser.

Achte immer darauf, dass deine Leinen frei von Verdrehungen sind und dass die Kiteleash korrekt verbunden ist.

Reinige dein Controlsystem immer mit frischem Wasser nach jeder Session, löse es aus und resete es wieder, um stets die Funktionstüchtigkeit zu prüfen. Verstaue dein Controlsystem mit dem Click-In Loop im ausgelösten Zustand. Resete es beim nächsten Aufbau des Kites.

Ozone V4 Bar - Replacements and installs

Ozone Short Safety Leash V2:
• Stainless Steel clip
• Push-Away release
• Simple re-load
• Compact size
• Designed for hooked in riding

Ozone Connect Backcountry V2:
The Connect Backcountry V2 harness has been designed for comfort and support while remaining clean, simple and lightweight. The second version has modifications to improve overall strength and load distribution.

This comfortable waist harness with leg straps is ideal for experienced backcountry snowkiters venturing deep into mountains, or riders looking for a lightweight alternative to the classic spreader bar system. The Connect Backcountry V2 has been designed similar to a rock climbing harness so that it will not ride up.

Webbing Loop connection for Quick Release – Heavy duty webbing loop to connect the Quick Release, reducing size and weight of the harness. Three step connection – open Quick Release, feed loop through webbing, reload Quick Release.

Ergonomic shaping - Increased support through wider and improved ergonomic shaped panelling. The load is distributed evenly over a larger area.
Strong internal structure - Plastic layers along the back section with full length webbing support for ideal load distribution and extra strength.

Leg support straps - Color coded, lightweight and comfortable leg straps with neoprene lining for a strong grip/hold on winter clothing. The leg straps are connected at an ergonomic angle distributing vertical loads between the attachment point and leg padding.

Comfort grip fit - Extra padded areas for increased comfort and neoprene lining for a strong grip/hold on winter clothing. It also protects better against the cold.

Lightweight construction - Strong yet lightweight construction for backcountry touring – weighs only 700grams!

Technical backpack connection - Female buckles on each side connect directly with Ozone Snow Kite Technical Mountain Bag. Simply unclip the waist strap from the backpack, remove it and click the bag straps into the harness.

Kite leash attachment – Easy to access front kite leash attachment.

Webbing loop attachments – Attach a grab handle or ropes for pulling sleds to the webbing loops on each side of the harness.

One size fits all – Fully adjustable to fit all shapes and sizes, both under or over clothing and outer winter layers.

Ozone Connect Pro V2:
New version available: Ozone Connect Snow V3 Harness

The Connect Pro V2 snowkite harness is ideal for all snow or land kiters with the added support and ease of use of a Stainless Steel Spreader Bar. This comfortable waist harness includes removable leg straps making it a very universal harness on the snow or land. The second version has modifications to improve overall strength and load distribution.

Designed for comfort, support and flexibility in use, this harness is perfect to wear over or under your snow gear. Featuring high quality Aluminium adjustment buckles on the spreader bar and leg straps. The Connect Pro V2 has been designed similar to a rock climbing harness so that it will not ride up.

Stainless Steel Spreader Bar – The Spreader Bar attaches directly to both the harness and the leg straps reducing spreader bar upward tilt. Extra padding and neoprene covered for comfort.

Aluminium buckles - High quality extra strong aluminium adjustment buckles are easy to open and close. This makes fitting on the harness very easy even under snow gear. Smooth adjustment reduces wear on webbing.

Ergonomic shaping - Increased support through wider and improved ergonomic shaped panelling. The load is distributed evenly over a larger area.
Strong internal structure - Plastic layers along the back section with full length webbing support for ideal load distribution and extra strength.

Removable leg support straps - Color coded, lightweight and comfortable leg straps with neoprene lining for a strong grip/hold on winter clothing. The leg straps are connected at an ergonomic angle distributing vertical loads between the attachment point and leg padding. They can be easily removed or fitted under your snow pants without having to take them off.

Comfort grip fit - Extra padded areas for increased comfort and neoprene lining for a strong grip/hold on winter clothing. It also protects better against the cold.

Technical backpack connection - Female buckles on each side connect directly with Ozone Snow Kite Technical Mountain Bag. Simply unclip the waist strap from the backpack, remove it and click the bag straps into the harness.

Kite leash attachment – Easy to access front kite leash attachment.

Webbing loop attachments – Attach a grab handle or ropes for pulling sleds to the webbing loops on each side of the harness.

One size fits all – Fully adjustable to fit all shapes and sizes, both under or over clothing and outer winter layers.