Moon Cerberus, 150 lm

A bike rear light with a bright red light designed for demanding users. USB rechargeable, 150 lm light output.

Moon Cerberus is an extremely high-performance bicycle rear light. It illuminates at an angle of 270° backwards, so that the light is also perceived from the side. The use of a rear light significantly increases the user's safety in traffic. The lamp has 2 continuously burning power modes, as well as three flashing lights, one of which is designed especially for use in daylight. Flashing light draws significantly more attention than steady light and ensures that you will be noticed in any weather. The lamp is equipped with a modern Li-PO battery, which is charged directly via the USB-C port on the body. 24 month warranty.

The lamp is ridiculously easy to detach and attach to, for example, the frame or saddle bar without any tools. The Li-PO battery lasts for several hundreds of charging times, so the use of the lamp is worry-free in terms of the battery as well. All in all, it is a rear light developed for demanding use for users who only want the best! The USB rechargeable, compact and stylish design, excellent visibility with a good burning time and easy user interface make the lamp a great choice for all kinds of cycling. Moon Cerberus weighs only 35 grams with the battery and bracket.

Contents of the package

• Moon Cerberus lamp
• 500 mAh Li-PO battery (built-in)
• USB-C charging cable
• Rubber protective cover
• Three fastening loops of different sizes

Technical information
Brand and Model: Moon Cerberus
Maximum light output: 150 lm
Operating modes: 2 continuous, 3 flashing
Battery: Built-in Li-PO battery, 500 mAh
USB-C rechargeable
Charging time: approx. 2 h
Waterproof: IPX-7
Weight: 35 g

Operating time

• High: 50 lm / 1 h 45 min
• Low: 25 lm / 3 h 30 min
• Uneven flashing: 25 lm / 20 h 15 min
• Steady flashing: 25 lm / 13 h 45 min
• Daylight flashing: 150 lm / 19 h 00 min

Quick guide
1. Turn on the light by pressing the power switch for approx. 1 second (upper switch). The power mode changes by pressing the switch again while the light is on. The light turns off in any power mode when the switch is pressed for approx. 1 second.

2. You can turn on the flashing modes by double-clicking the switch when the light is on. You can get back to normal power modes by repeating the above. You can change the flashing mode by pressing the power switch.

3. The key lock is activated when the power switch is pressed while the light is off for approx. 8 seconds. The lock opens in the same way.

4. Charging starts by connecting the charging cable to the charging plug. The matrix display shows the charging status.