Vauhti FC Speed Block Wet, 20g +10...-1

Weather range: +10/-3°C

For all snow qualities, from slush down to -3°C.

Same as the previous FC Wet button, but with purified fluorine raw materials according to ECHA regulations, PFOA <25ppb.

FC compresses have the same composition as the corresponding FC powders. FC presses are suitable for coating quick slides, base waxes, fluorine waxes and powders. You can lubricate them either as cold lubrication by rubbing with the cap or by ironing.

Use:

1. Clean the base of the ski carefully with Vauhti Clean&Glide cleaning and maintenance fluid.
2. Use a wax or quick glide suitable for the snow quality and humidity as a base cream.
3. Swish and brush the cream layer that comes under the press with a roaster or brass brush and finish carefully with a nylon brush.
4. Rub the paste on the sliding surfaces, fix it with a roto cork or by rubbing with a natural cork by hand.
5. Cool and shake lightly

Start brushing with a few strokes of the grid brush and continue brushing carefully with the nylon brush. When using rotobrushing, brush carefully with rotonylon, if necessary, first use lightly with a rotohorse brush. With water gel After nylon brushing, lightly finish with a fine-bristled metal or horsehair brush (matte surface increases water repellency).

For longer trips, iron the bottom layer lightly with a grease iron, cool, rinse lightly, brush the sliding surfaces, add another layer and fasten it by cold rubbing and brushing as above.