Ursuit Pursuit X3 dry suit

Please, note that the colour in the picture is different than in the actual product.

Due to its durable material, Pursuit X3 can be recommended especially for hard working in very dirty or polluted circumstances.

-Anatomic design for a perfect fitting. Reflective patches for high visibility. Flow restrictor at the calf to reduce air movement.
-Integrated suspenders and loops help diver to dress the suit and allow comfort

- Material flexible as most rubber materials
- Extremely good resistance to abrasion and tearing
- Extremely good resistance to UV and oils
- Long lasting, due to fully synthetic material it won’t age
- High frequency welded seams, very strong, no stitches, no taping
- Water repellent surface dries fast
- Easy to clean e.g. from oil or dirty water
- Easy to repair
- Weight only about the half of a rubber suit
- Standard sizes and measure made suits

- Attached 5-mm neoprene hood with
a yellow safety stripe on top of the
head.
- Face seal made of so-called
sandwich material. Smooth
neoprene on both sides, with nylon
reinforcement in between.
- Swivelling inlet valve manufactured
by SI-Tech
- Low profile outlet valve by Si-Tech
Shoulder zipper with a protective
strip
- Reflective tapes at arms and ankles
Wrist seals are latex seals of bottle
neck type
- Neck seal is bellow shaped latex
seal
- Ankle straps
- Knee reinforcements, polyurethane
coated nylon or suit material when
requested
- Boot 5 mm latex rubber coated
neoprene shoe with a strap retainer
at heel.
- Integrated suspenders

TEMPERATURE RANGE
The usage temperature range of TPU is very wide. As suit material it softens in +70º C, for a shorter time in +120º C. It also stands low temperatures down to -45º C.
HYDROLYSIS TOLERANCE
TPU has been stored in water for several years without any influence and without any weakening effect on the mechanical properties of the material.
OIL AND SOLVENT RESISTANCE
TPU is chemically resistant to (non-polar) solvents like hexane and heptanes. Mineral oils like diesel oil and lubricants do not harm the material. Some synthetic oils may
damage the TPU. Toluene and acetone soften the TPU surface. Tetrahydrophrane,
methylethylketone and dimetylformamide may partly of fully destroy TPU.

MICROORGANIC RESISTANCE
TPU is very durable against microorganisms, but the colour of the material may change. The mechanical properties are not weakened. The enclosure presents the test results of different types of dry suit materials.