Lantac
4 商品
スポーツ» ミリタリー商品» 銃の部品» Rifle parts» Flash Hiders and Muzzle Brakes»
Lantac BMD™ Type A, Blast Mitigation Device™
納入可能
商品は現在在庫切れです。
在庫状況
商品説明
重量
1 kg(製品パッケージも重量に含まれる場合もあります)
製造国
アメリカ合衆国
コメントコメントを追加する
ブランド商品
商品は現在在庫切れです。
在庫状況
商品説明
The BMD™ is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation. The patent pending design features unique 'through' ports that connect the muzzle brakes vertical vents to the outside atmosphere.
This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency.
The device also features sets of 'diffuser' grids positioned towards the top of the blast shield that assist in allowing gas to vent upwards as well as forwards at the time of firing, assisting even further in muzzle control.
Concussive muzzle blast is directed forwards, down range and away from other shooters and team mates.
Radial teeth at the exit aperture help to disrupt blast gas at it exits the device.
The BMD™ is mounted to the DGN556B™ Muzzle Brake through the use of an adapter collar. The collar is designed to fit as wide a range of brake outside diameters as possible and can effectively be mounted within the following size range:
.855'' to .872'' Diameter.
It is recommended that you use a quality set of vernier and check the outside diameter of your muzzle device before ordering.
Diameters outside the ranges listed may need additional gunsmith work to be fitted or may not be used with this product.
Measurements should be taken from the circular section of the brake marked with the 'LANTAC' logo.
The BMD™ mounts to the collar via the use of two rugged clips that must both be depressed together in order to remove the device from its mount..
The device ships with a vial of Rocksett that must be used to ensure all mounting set screws are retained in place when the adapter is mounted to the brake.
SPECIFICATION:
Caliber: 5.56X45mm / .223
Material: Milspec Gun Steel
Finish: Black Oxide
Dimensions: L: 2.570'', DIA of body at largest point: 1.600'', at smallest point: 1.185''
Width at mounting clips: 1.785''
Weight including all mounting hardware: 7.3oz
Designed for the DGN556B™ Dragon™ Muzzle Brake only
Full instructions included
Rocksett Included
Made in the USA.
This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency.
The device also features sets of 'diffuser' grids positioned towards the top of the blast shield that assist in allowing gas to vent upwards as well as forwards at the time of firing, assisting even further in muzzle control.
Concussive muzzle blast is directed forwards, down range and away from other shooters and team mates.
Radial teeth at the exit aperture help to disrupt blast gas at it exits the device.
The BMD™ is mounted to the DGN556B™ Muzzle Brake through the use of an adapter collar. The collar is designed to fit as wide a range of brake outside diameters as possible and can effectively be mounted within the following size range:
.855'' to .872'' Diameter.
It is recommended that you use a quality set of vernier and check the outside diameter of your muzzle device before ordering.
Diameters outside the ranges listed may need additional gunsmith work to be fitted or may not be used with this product.
Measurements should be taken from the circular section of the brake marked with the 'LANTAC' logo.
The BMD™ mounts to the collar via the use of two rugged clips that must both be depressed together in order to remove the device from its mount..
The device ships with a vial of Rocksett that must be used to ensure all mounting set screws are retained in place when the adapter is mounted to the brake.
SPECIFICATION:
Caliber: 5.56X45mm / .223
Material: Milspec Gun Steel
Finish: Black Oxide
Dimensions: L: 2.570'', DIA of body at largest point: 1.600'', at smallest point: 1.185''
Width at mounting clips: 1.785''
Weight including all mounting hardware: 7.3oz
Designed for the DGN556B™ Dragon™ Muzzle Brake only
Full instructions included
Rocksett Included
Made in the USA.
この商品の配送方法は以下です。 配送方法:
- 当店舗でのお引き取り
- Matkahuoltoの宅配便案内所への配送
- Posti freight to doorstep
- R-kioskiまたは Kマーケットの案内所でのお引き取り (DB Schenker)
- ご指定の郵便局でのお引き取り
- ご自宅までの配送 (DB Schenker)
- ご自宅までの配送 (Matkahuolto Jakopaketti)
- ご自宅までの配送 (Posti)
- ご自宅までの配送 (Posti 朝)
- フォローアップレター
- ユーロ荷台パレット, 営業時間内に
- ユーロ荷台パレット, 調整した時間
- 時間指定でのご自宅までの配送 (Matkahuolto Kotijakelu)
- 時間指定でのご自宅までの配送 (Posti Home Parcel)
- 特殊パレット
- 運搬台車, 営業時間内に
- 運搬台車, 調整した時間
- 郵便局の宅配便ロッカーでのお引き取り
- 当店舗でのお引き取り
- Matkahuoltoの宅配便案内所への配送
- Posti freight to doorstep
- R-kioskiまたは Kマーケットの案内所でのお引き取り (DB Schenker)
- ご指定の郵便局でのお引き取り
- ご自宅までの配送 (DB Schenker)
- ご自宅までの配送 (Matkahuolto Jakopaketti)
- ご自宅までの配送 (Posti)
- ご自宅までの配送 (Posti 朝)
- フォローアップレター
- ユーロ荷台パレット, 営業時間内に
- ユーロ荷台パレット, 調整した時間
- 時間指定でのご自宅までの配送 (Matkahuolto Kotijakelu)
- 時間指定でのご自宅までの配送 (Posti Home Parcel)
- 特殊パレット
- 運搬台車, 営業時間内に
- 運搬台車, 調整した時間
- 郵便局の宅配便ロッカーでのお引き取り
重量
1 kg(製品パッケージも重量に含まれる場合もあります)
製造国
アメリカ合衆国コメントコメントを追加する
ブランド商品