Ammonite Accu Thermo Type 24

Accu Thermo Type 24 is a modern power supply source for heated dive wear. Simplicity, intuitive operation and performance reliability; up to 200 Watts heating power. The charging port of ACCU THERMO may be optionally applied to connect any of Ammonite System lamp head.
 
Every Accu Thermo heating battery head contains two power outputs. One, secured with a protective plug, can supply an umbilical light and charge battery pack. Second- E/O cord is made to power heating gear only. 

Outputs differ in voltage, so misusing it may lead to damage to your equipment!

LED indicator – information on the battery level, intelligent E/O – an electronic circuit protecting the contacts of a wet connector from damage; Intelligent E/O “knows” when a cable is disconnected and when to cut off voltage, as well as when to bring back power supply after reconnecting. LED indicator – information on the battery level, intelligent E/O – an electronic circuit protecting the contacts of a wet connector from damage; Intelligent E/O “knows” when a cable is disconnected and when to cut off voltage, as well as when to bring back power supply after reconnecting.

The compact size casing all made of high grade hard anodised aluminium; the device is sealed with two o-rings and equipped with a safety valve.

Every ACCU THERMO box includes a charger. 

Techincal features:

capacity nominal	23,45 Ah
charge/discharge cycles	500-700
charger input voltage	100-240 V
over pressure valve	YES
rechargeable battery	Li-Ion
total energy	242 Wh
voltage	10,95 V
max. length	262 mm
max. diameter	66mm
weight	1610 g
weight in water	715 g
max. operation depth	100 m

Operating times:

Gloves 30 W	8h 5min
Vest 55 W	4h 25min
Undersuit 110 W	2h 10min
Gloves + Vest 85 W	2h 50min
Gloves + Undersuit 140 "	1h 45min