FROG.PRO COBRA Range Belt

The belt inner core, made of a semi-rigid scuba type webbing that ensures the correct stifness, is wrapped in a double layer of MIL-W-17337-Class 2 webbing that guarantees strenght, durability, light refraction typical of the MIL-SPEC webbings and at least gives it the desired color.

The buckle up system is entrusted to an AustriAlpin COBRA® D-ring buckle in matte black color that has a breaking load of 18 kN (1835 kgf). This buckle is designed to prevent accidental opening, in fact the security system allows it to be opened only if not under load and only by pressing both the release buttons.

The D-ring, with a breaking load of 22 kN (2243 kgf), can be used with the PRL (Personal Retention Lanyard) or other accessories for rappelling or emergency.

The new Ultra-Mate® velcro in neutral color is sewn in the inner part, which, due to its excellent adhesion power, guarantees a perfect pairing when used as an outer belt. Thanks to the slim profile of the new Velcro, less rough than the traditional one, this belt can also be worn alone as a trouser belt.

The COBRA Range Belt is available in four different sizes. A further adjustable velcro regulation allows to fit the belt while used with garments inside the pants. The velcro is sewn in order to prevent the removal of the sliding component of the buckle, making it extremely safe.

Weight: from 280 to 310 g (depending on size)
Height: 1-1/2 ”

Dimensions:
Small 86-94 cm
Medium 94-102 cm
Large 102-110 cm
X-Large 110-118 cm

The measures shown are related to the inner circumference of the belt when closed. For a correct sizing, wear the garments you would use together with the belt and wear the Trousers / Inner Belt or a similar belt, then measure you waist circumference with a soft tape measure directly above the latter. If you don’t have a soft tape measure, you can use a non-elastic rope and then measure it with an hard meter.