Oletko Viranomainen? Meiltä 10% Viranomais­alennus lähes kaikkiin tuotteisiin - Katso ohjeet »
Sporturi‪» Linie tactică‪» Optică‪» Mounts and accessories‪» Optics risers‪»

BCM A/T™ Optic Riser 525-5

BCM A/T™ Optic Riser 525-5

BCM A/T™ Optic Riser 525-5
BCM A/T™ Optic Riser 525-5
BCM A/T™ Optic Riser 525-5
BCM A/T™ Optic Riser 525-5
BCM A/T™ Optic Riser 525-5
BCM A/T™ Optic Riser 525-5
BCM A/T™ Optic Riser 525-5
BCM A/T™ Optic Riser 525-5

Preț outlet
71,14 incl. TVA 25.5% (56.69 €, TVA 0) + costuri de livrare
Preț normal 99,90 €


Cantitate
(max 2 buc)


Disponibil în stoc
Magazin (Helsinki)la raft0 buc
Magazin (Helsinki)în stoc2 buc imediat
Disponibile in magazinul online2 buc imediat

Disponibilitate
Imediat

Disponibilitate


Descriere produs
A/T Optic Riser 525-5 is approximately 2-1/8” long and is intended to be used with a red dot or other single optic or accessory.  This riser has 5 recoil slots (6 lugs).  All of our risers are the same .525 of rise over the top surface of the upper receiver.


BCM® A/T™ Riser

Ideal for layering magnifiers and other enhancement systems with red dot optics, BCM A/T Risers offer the potential for a more capable platform that can improve threat identification in complex settings. 

BORNE FROM EXPERIENCE

Optimized for close combat ranges, the BCM A/T Riser creates a platform that raises the centerline of attached optics and magnifiers by approximately 1/2 inch. This additional height enhances the trained end user’s situational awareness, and further, makes it possible for them to take better aimed shots if they are using the optic in conjunction with night vision or other PPE systems.

Interfacing with the upper receiver using the same low-profile A/T system used in our Optic Mounts, not only reduces snag hazards but makes the entire length of rail usable for either bolt-on or QD attachments. Further, the low profile A/T interface enables mounting accessories with Mil-Std 1913 attachments anywhere on the stalk of the riser platform allowing end users to fine tune placement of optics, magnifiers, and other accessories.

Each A/T Riser is machined from aircraft aluminum alloy, hard coat anodized per Mil-A-8625F. The steel alloy clamp is hardened with Nitride coating for maximum strength. Finally, each Riser features multiple integral recoil lugs to mitigate recoil and counter recoil to preserve your zero and ensure “no fail” shots are placed where intended by the trained rifleman.

Dimensiunea aproximativă a produsului ambalat sau a pachetului de vânzare este 90 x 80 x 30 mm.


Greutate
0,064 kg(Include greutatea ambalajului de vânzare (dacă este prezent))


Tară de origine
Statele Unite ale Americii


Comentarii
Adăugați un comentariu

Brand