Arisaka Offset Scout Mount™ Spear FDE

The Patented Arisaka Offset Scout Mount is designed specifically for the MCX Spear LT handguard, and is intended to be used with the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter, reducing bulk and bringing the light in closer to the handguard.

If mounted at the 3 or 9 o'clock m-lok slots, the mount closely hugs the handguard while also providing enough clearance for top rail mounted lasers like the ATPIAL-C, PEQ-15, DBAL-A2, and NGAL. The mount functions with the MAWL by flipping it over and attaching it to the angled m-lok slots, with the light sitting below. This mount also works well with the Aero Precision Enhanced Gen 2 handguards.

The Offset Scout Mount provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240". This allows for use next to most laser aiming devices.

Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin and Odin Mini, CD REIN, and Arisaka 300, 600 and 18650 Series.

M620, M951/2 and M961/2 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.

Length: 1.265"

Weight: 0.4 oz

Distance from center of M-Lok screw hole to 30 degree angle is 0.375".

The mount is CNC machined from 6061-T651 aluminum and MIL-A-8625 Type III hard coat anodized, followed by Magpul FDE Cerakote. Includes necessary screws to attach light body to mount. Requires an IP20 TorxPlus driver for installation (not included). A T9 Torx driver is required to remove the stock Picatinny mount from Surefire Scout Lights. Recommended torque: 30 inch lbs for M-Lok screws and 20 inch lbs for light body screws with Loctite 222 or 243.

Hardware: Two M-Lok nuts, two 10-24x5/16" Torx button head screws, two 8-32x3/8" Torx flat head screws.

This product is covered by U.S. Patent No(s). 11385026 and other pending patents.

Made in the USA.