Oletko Viranomainen? Meiltä 10% Viranomais­alennus lähes kaikkiin tuotteisiin - Katso ohjeet »

BCM BFH 11.5" Carbine Upper Receiver Group w/ BCM MCMR-10 Handguard

BCM BFH 11.5" Carbine Upper Receiver Group w/ BCM MCMR-10 Handguard

BCM BFH 11.5" Carbine Upper Receiver Group w/ BCM MCMR-10 Handguard
BCM BFH 11.5" Carbine Upper Receiver Group w/ BCM MCMR-10 Handguard
BCM BFH 11.5" Carbine Upper Receiver Group w/ BCM MCMR-10 Handguard
BCM BFH 11.5" Carbine Upper Receiver Group w/ BCM MCMR-10 Handguard

Hinta
1 190,00 sis. alv 24% (959.68 €, alv 0) + toimituskulut
Tästä tuotteesta ei anneta alennusta VIP-asiakkaille.


Määrä
kpl



Syntymäaika (pakollinen)

Aseenhankintaluvan numero (pakollinen)

Kuva henkilöllisyystodistuksesta
Valitse liitetiedostot ...

Aseenhankintaluvan viimeinen voimassaolopäivä (pakollinen)

Aseen sarjanumero

Luvanhaltijan etunimi (pakollinen)

Luvanhaltijan sukunimi (pakollinen)


Myymälä (Helsinki)hyllyssä0 kpl
Netistä toimitettavissa0 kpl


Voit tilata tätä tuotetta korkeintaan varastossa olevan määrän.
Saatavuus
Tuote ei ole myynnissä tällä hetkellä.

Varastotilanne ja saapuvat


Tuotteen kuvaus
Made by Bravo Company MFG, Inc. (BCM) These Barreled Upper Receiver Groups are designed for shooting professionals with the Mil-Spec features for the demands of their duty. They are fully assembled, headspaced, and test fired.
As a note: BCM barrel components are parkerized separately before assembly. Prior to shipping, all BCM upper receiver groups are test fired for function, laser bore sighted with a Milspec carry handle for sight alignment within Mil-Specs, and then batch samples are test fired for accuracy. As such, the upper receiver group will show handling marks consistent with these quality control procedures.

Cold Hammer Forged Barrels
This process of manufacturing barrels has been used for European small arms for generations, and it is gaining popularity in the United States because of the increased barrel life and outstanding accuracy of a hammer forged barrel. The BCM BFH™ series of barrels are made right here in the USA! (Just like all the BCM products.)

M4 Feed Ramp Barrel Extension

M4 Feed Ramp Flat Top Receiver
In developing the USGI M4 carbine as one of the primary weapons for today’s infantry, some modifications were performed to the original M16 platform to enhance the reliability of the shorter barreled carbines. With the shorter carbine gas system and the increased gas port pressure, the carbine cycled faster, and at times the cycle rate could be faster than the magazine would feed ammunition. One of the modifications done to increase reliable feeding included enhancing the angle and the length of the feed ramps. This USGI modification was done to both the barrel extension and the upper receiver, creating a longer and steeper feed ramp. These Mil-Spec M4 feed ramps are part of the original CNC manufacturing process. As a result, the factory machined M4 feed ramps on the receiver are hard coat anodized which adds significant strength to the aluminum. This feature is offered on all BCM uppers and all BCM barrels.

T-Marked Upper Receiver
The contemporary M16/M4 rifle is built around the concept of modularity. All of the BCM flat top uppers feature a USGI type laser etched T-marks to provide addressing for the remounting of tactical accessories such as optics, laser sights, etc. This enables the weapon platform to be easily configured and then accurately reconfigured for each specific mission.

USGI 1/7 Twist Rate
The USGI 1/7 twist rate of all of the BCM barrels is the preferred twist rate by most professional infantryman. This twist rate has proven very versatile and can effectively run the new heavier 5.56 ammo that is hugely popular with military and private security personal for its’ superior ballistics.

Mil-Spec Barrel Steel (Certified Mil-B-11595E)
BCM barrel steel is Mil-Spec per MIL-B-11595E, and is independently certified. The 4150 grade (CMV) of steel is a Mil-Spec steel used in the USGI M16 family of rifles; it is stronger and will last longer than the typical barrels offered in the commercial market. This Mil-Spec grade 4150 steel gets its’ additional strength and rigidity from an increase in carbon and/or vanadium in the alloy. This will offer increased barrel life and performance through use in all types of extreme environments and temperatures.

Chrome Bore and Chamber
One of the first modifications that were made to the original M16 in the mid 1960’s was the addition of the chrome lined bore and chamber. It is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and on the USGI M16/M4 rifles will aid in chambering, extraction, and reliability. It increases velocity, and also resist against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.

Manganese Phosphate Barrel Finish
Barrels are parkerized with the manganese phosphate finish (Mil-Spec A-A-59267). Military specifications also state that the entire barrel surface is phosphate finished to create a porous surface to absorb oil as to resist against corrosion from the elements. BCM barrels are phosphated before installation of front sights. This is a much more extensive assembly operation, but insures that the entire barrel is finished and protected . . .even under the front sight base.

5.56 NATO Chambers
The USGI 5.56 NATO chamber is the best choice for effective deployment, reliability, and compatibility, of higher chamber pressures of military ammo.

Government Barrel Profiles
Duty rifles are built to be carried - day in and day out. The USGI barrel profiles (often referred to as the Government Profile) enable the operator to carry their weapon for longer periods of time and deploy them faster than the heavier commercial H-Barrel counterparts. The government profile barrel is also compatible with the current M203 mounting systems.

HPT / MP Inspected Barrels
Military specifications require that barrels undergo a HPT (High-Pressure Test) load as a part of quality assurance procedures. Commonly referred to as a proof load, the M197 HPT is rated for 70,000 psi. BCM barrels are proof loaded and then MPI (Magnetic Particle Inspected) to detect any possible flaws in the barrels surface. The barrels are MP inspected with both circular and longitudinal magnetic fields per ASTME1444-01 (current Mil-Spec) to assure a high quality finished product. All BCM barrels are marked HP MP as our proof load marking.

Features
Cold Hammer Forged Barrel
M4 Feed Ramp Barrel Extension
M4 Feed Ramp Flat Top Receiver
T-Marked Upper Receivers
USGI 1/7 Twist Rates
USGI 5.56 NATO Chambers
Mil-Spec 11595E - Certified Barrel Steel (CMV)
Chrome Lined Bore and Chamber
Manganese Phosphate Barrel Finish
USGI Government Profile Barrels
HPT (High Pressure Test) Barrels
MPI (Magnetic Particle Inspected) Barrels

Tuotteen koko pakattuna tai myyntipakkauksen koko on arviolta 600 x 100 x 100 mm.

Tämä tuote toimitetaan vain näillä toimitustavoilla:
- Nouto myymälästämme
- Toimitus perille asti (Matkahuolto Jakopaketti yrityksille)
- Toimitus sovittuun aikaan perille asti (Matkahuolto Kotijakelu)


Kaliiperi
.223 Rem


Piipun pituus
11,5"


Paino
2 kg(Sisältää mahdollisen myyntipakkauksen painon)


Valmistusmaa
Yhdysvallat


Kommentit
Lisää kommentti

Tuotemerkki